Customize your nails

How to adjust the shape and length of your Switch Nails

Switch Nails are designed to fit a wide range of nail shapes and sizes. However, you can also customize your press-on nails to better match your personal preferences.
In this guide, we will go over what to think about when deciding to customize your nails.

Adjusting the shape and length

You can file or trim your press-on nails to achieve your desired shape or length.
Just like salon-built nails, press-on nails consist of several layers: a base nail, a layer of color or design and a protective top coat. When filing the nail, it is important to work gently.
If you file too aggressively or use a very coarse nail file, the layers may begin to separate. This might not be visible immediately but can cause the color or design to wear down faster over time.
For this reason, we recommend filing slowly and carefully using light strokes.

Step 1

Start by cutting off the bulk of the length.
It’s easier to get the right length if you’re already wearing the nails.

Step 2

Now shape the nail with a file.
Use a coarser grit if you want to remove more length, then switch to a finer grit to smooth everything out.
Work from side to side, and angle your file for more precision. Work gently and carefully.

Step 3

Finish with a top coat and make sure to seal the edges.
This helps protect the tip and keeps your nails looking fresh for longer.

Votre recherche pour “” n'a retourné aucun résultat.

Vérifiez votre orthographe ou essayez avec un mot-clé moins précis.

Our recommendations

Dedicate your set to one design!If you choose to customize your press-on nails, we recommend dedicating the set to one design rather than repainting and removing polish multiple times. Frequent use of remover can gradually wear down the surface of the nail.
Test on a size you do not plan to wear!Whenever you experiment with filing, polish, gel or removers, always test on a nail size you do not plan to wear. This allows you to see how the nail reacts before modifying the rest of the set.
Finish with top coat. Whenever you customize your press-on nails, applying a layer of top coat helps protect the design and adds extra durability. And don't forget to cover the tip of the nail.